#1 2009-10-11 09:50:16
[Oleg] WL-500gP + 802.11n
機型: WL-500gP
mini PCI無線網卡: WL-121W R1.03
韌體: WL500W-1.9.2.7-10.trx
$ wl ver
4.150 RC10.5
wl0: Oct 4 2007 21:05:23 version 4.150.10.16
$ wl status
SSID: "default"
Mode: Managed RSSI: 0 dBm noise: 0 dBm Channel: 8
BSSID: 00:1D:60:xx:xx:xx Capability: ESS ShortSlot
Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ]
802.11N Capable:
Chanspec: 2.4GHz channel 8 40MHz (0x2d08)
Control channel: 6
802.11N Capabilities:
Supported MCS : [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
$ wl cap
ap sta wet mac_spoof led wme pio 802.11d 802.11h rm cqa mbss4 afterburner ampdu amsdu離線
#4 2009-10-11 17:25:13
Re: [Oleg] WL-500gP + 802.11n
Aven 提到:
結論是 WL-500GP + mini PCI無線網卡: BCM4321L + BCM2055 (WL-500W) 可以就地升級成 WL-500W ?
補充恢復預設值後的console訊息, 請參考.
Restarting system.
Please stand by while rebooting the system...
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: ￥| 10?e 12 22:21:19 CST 2006 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.7.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29006: 264MHz
Total memory: 67108864 KBytes
Total memory used by CFE: 0x80800000 - 0x8089AF40 (634688)
Initialized Data: 0x808313D0 - 0x80833790 (9152)
BSS Area: 0x80833790 - 0x80834F40 (6064)
Local Heap: 0x80834F40 - 0x80898F40 (409600)
Stack Area: 0x80898F40 - 0x8089AF40 (8192)
Text (code) segment: 0x80800000 - 0x808313D0 (201680)
Boot area (physical): 0x0089B000 - 0x008DB000
Relocation Factor: I:00000000 - D:00000000
Committing NVRAM...dony
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: ￥| 10?e 12 22:21:19 CST 2006 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.7.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29006: 264MHz
Total memory: 67108864 KBytes
Total memory used by CFE: 0x80800000 - 0x8089AF40 (634688)
Initialized Data: 0x808313D0 - 0x80833790 (9152)
BSS Area: 0x80833790 - 0x80834F40 (6064)
Local Heap: 0x80834F40 - 0x80898F40 (409600)
Stack Area: 0x80898F40 - 0x8089AF40 (8192)
Text (code) segment: 0x80800000 - 0x808313D0 (201680)
Boot area (physical): 0x0089B000 - 0x008DB000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr xx-xx-xx-xx-xx-xx, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3560 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029006
Primary instruction cache 16kb, linesize 16 bytes (2 ways)
Primary data cache 16kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 (root@localhost) (gcc version 3.2.3 with Broadcom modifications) #18 Sun Mar 30 13:13:29 MSD 2008
Setting the PFC to its default value
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd init=/linuxrc console=ttyS0,115200
CPU: BCM4704 rev 9 pkg 0 at 264 MHz
Calibrating delay loop... 263.78 BogoMIPS
Memory: 62508k/65536k available (1862k kernel code, 3028k reserved, 136k data, 72k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
NTFS driver v1.1.22 [Flags: R/O]
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
HDLC line discipline: version $Revision$, maxframe=4096
N_HDLC line discipline registered.
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
PPPoL2TP kernel driver, V0.13 (oleg@cs.msu.su)
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
Flash Id: Vendor: 0x0001 Device: 0x007e
number of CFI chips: 1
Flash device: 0x800000 at 0x1c000000
Physically mapped flash: squashfs filesystem found at block 912
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "boot"
0x00040000-0x007f0000 : "linux"
0x000e4000-0x007f0000 : "rootfs"
0x007f0000-0x00800000 : "nvram"
0x003e0000-0x007f0000 : "flashfs"
sflash: found no supported devices
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (512 buckets, 4096 max) - 352 bytes per conntrack
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear
All bugs added by David S. Miller
FAT: bogus logical sector size 40448
FAT: bogus logical sector size 40448
NTFS: Unable to set blocksize 512.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 72k freed
Algorithmics/MIPS FPU Emulator v1.5
eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
PCI: Enabling device 01:02.0 (0004 -> 0006)
eth1: Broadcom BCM4329 802.11 Wireless Controller 4.150.10.16
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
device eth1 entered promiscuous mode
br0: port 2(eth1) entering listening state
br0: port 1(vlan0) entering listening state
br0: port 2(eth1) entering learning state
br0: port 1(vlan0) entering learning state
br0: port 2(eth1) entering forwarding state
br0: topology change detected, propagating
br0: port 1(vlan0) entering forwarding state
br0: topology change detected, propagating
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 20:50:46 Mar 17 2008
usb-uhci.c: High bandwidth mode enabled
PCI: Enabling device 01:03.0 (0000 -> 0001)
ECHI PCI device 30381106 found.
UCHI reg 0x41 = 10
UCHI reg 0x41 changed to = 0
usb-uhci.c: USB UHCI at I/O 0x100, IRQ 12
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Enabling device 01:03.1 (0000 -> 0001)
ECHI PCI device 30381106 found.
UCHI reg 0x41 = 10
UCHI reg 0x41 changed to = 0
usb-uhci.c: USB UHCI at I/O 0x120, IRQ 12
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
PCI: Enabling device 01:03.2 (0000 -> 0002)
ehci_hcd 01:03.2: PCI device 1106:3104
ehci_hcd 01:03.2: irq 12, pci mem c011d000
usb.c: new USB bus registered, assigned bus number 3
ECHI PCI device 31041106 found.
ECHI reg 0x49 = 80010f20
ECHI reg 0x49 changed to = 80010f00
ECHI reg 0x4b = 80010f09
ECHI reg 0x4b changed to = 80010f29
PCI: 01:03.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
usb.c: registered new driver audio
audio.c: v1.0.0:USB Audio Class driver
Linux video capture interface: v1.00
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
PCI devices found:
Class 0501: PCI device 14e4:0800 (rev 9).
Class 0200: PCI device 14e4:4713 (rev 9).
Class 0200: PCI device 14e4:4713 (rev 9).
Class 0c03: PCI device 14e4:4715 (rev 9).
Class 0604: PCI device 14e4:0804 (rev 9).
Class 0b30: PCI device 14e4:0816 (rev 9).
Class 0703: PCI device 14e4:4712 (rev 9).
Class 1000: PCI device 14e4:4718 (rev 9).
Class 0500: PCI device 14e4:080f (rev 9).
Class 0600: PCI device 14e4:4704 (rev 9).
Class 0280: PCI device 14e4:4329 (rev 1).
Class 0c03: PCI device 1106:3038 (rev 98).
Class 0c03: PCI device 1106:3038 (rev 98).
Class 0c03: PCI device 1106:3104 (rev 101).
echo for PaN ::: &&&PaN 離線
相關討論主題
| 主題 | 回覆 | 點閱 | 最後發表 |
|---|---|---|---|
|
|
25 | 88220 | 2020-09-02 12:14:11 作者 DoBeDo |
|
|
20 | 85149 | 2016-05-23 21:42:42 作者 lookovergirl |
|
置頂 |
152 | 532884 | 2015-09-26 19:03:04 作者 nune |
|
|
57 | 207078 | 2014-01-07 23:42:40 作者 hannahmo |
|
WL-500gP V1是否可以更换网卡升级成WL-500W？谢谢！ 作者 Zippy
|
7 | 29199 | 2013-11-29 08:46:45 作者 hannahmo |
