#3 2009-12-14 16:40:30
Re: [DD-WRT] kernel 2.6的版本
hippo 提到:
DD-WRT svn13450已支援Buffalo WHR-HP-G54. 這台可能是想玩V24-K26最便宜的機種, 有興趣的網友可以參考看看. Tomato也有支援喔.
請問...
Buffalo WHR-HP-G54安裝上面的韌體
是直接從上面的下載新韌體後直接更新就可以了嗎?
除了和新升級成為v2.6以外...
功能上面是否還有其他的不同..?
是否有相關的說明網頁連結?
謝謝~!!
初來新手..還請多多指教~!!
離線
#4 2009-12-14 18:31:35
Re: [DD-WRT] kernel 2.6的版本
deepcolor 提到:
請問...
Buffalo WHR-HP-G54安裝上面的韌體
是直接從上面的下載新韌體後直接更新就可以了嗎?
若打算從原廠韌體更新成 DD-WRT，可以透過 Eko 寫的一隻小程式- ddadder，把DD-WRT版韌體加上Buffalo專屬檔頭，這樣就可以從原廠韌體更新界面直接更新成 DD-WRT。
deepcolor 提到:
除了和新升級成為v2.6以外...
功能上面是否還有其他的不同..?
是否有相關的說明網頁連結?
謝謝~!!
感覺上功能沒什麼差別，不過V24-K26版可能剛支援WHR-HP-G54的關係，Web管理界面還沒有中文化可供選擇 
舊版:Linux version 2.4.37
DD-WRT v24-sp2 voip (c) 2009 NewMedia-NET GmbH
Release: 07/21/09 (SVN revision: 12533)
DD-WRT login: root
Password:
==========================================================
____ ___ __ ______ _____ ____ _ _
| _ \| _ \ \ \ / / _ \_ _| __ _|___ \| || |
|| | || ||____\ \ /\ / /| |_) || | \ \ / / __) | || |_
||_| ||_||_____\ V V / | _ < | | \ V / / __/|__ _|
|___/|___/ \_/\_/ |_| \_\|_| \_/ |_____| |_|
DD-WRT v24-sp2
http://www.dd-wrt.com
==========================================================
BusyBox v1.13.4 (2009-07-21 01:59:42 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
root@DD-WRT:~# dmesg
CPU ProcId is: 0x00029008, options: 0x0000004d
Linux version 2.4.37 (root@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #6117 Tue Jul 21 02:02:29 CEST 2009
Setting the PFC to its default value
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
CPU: BCM5352 rev 0 at 200 MHz
Using 100.000 MHz high precision timer.
Calibrating delay loop... 199.47 BogoMIPS
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
PCI: Setting latency timer of device 00:01.0 to 64
PCI: Setting latency timer of device 00:05.0 to 64
sb_doattach: incoming bus is PCI but it's a lie, switching to SB devid:0x4318
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x400000 at 0x1c000000
bootloader size: 262144
Physically mapped flash: Filesystem type: squashfs, size=0x2a42a7
partition size = 2804736
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x003f0000 : "linux"
0x00123400-0x003d0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x003f0000-0x00400000 : "nvram"
0x003d0000-0x003f0000 : "ddwrt"
sflash not supported on this router
Initializing Cryptographic API
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded - (c) astaro AG
ipt_osf: Startng OS fingerprint matching module.
ipt_IPV4OPTSSTRIP loaded
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
vlan0: del 01:00:5e:00:00:01 mcast address from vlan interface
vlan0: del 01:00:5e:00:00:01 mcast address from master interface
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
vlan0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
device eth1 entered promiscuous mode
device vlan1 entered promiscuous mode
vlan1: Setting MAC address to 00 0d 0b cb 38 55.
vlan1: dev_set_promiscuity(master, 1)
vlan1: dev_set_allmulti(master, 1)
vlan1: dev_set_promiscuity(master, -1)
device vlan1 left promiscuous mode
vlan1: dev_set_allmulti(master, -1)
ip_conntrack_pptp version 1.9 loaded
etherip: Ethernet over IPv4 tunneling driver
ip_nat_pptp version 1.5 loaded
ip_nat_pptp version 1.5 unloaded
ip_conntrack_pptp version 1.9 unloaded
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_nat_pptp version 1.5 unloaded
ip_conntrack_pptp version 1.9 unloaded
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_nat_pptp version 1.5 unloaded
ip_conntrack_pptp version 1.9 unloaded
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
root@DD-WRT:~#
V24K26版:Linux version 2.6.24.111
DD-WRT v24-sp2 voip (c) 2009 NewMedia-NET GmbH
Release: 12/12/09 (SVN revision: 13450)
DD-WRT login: root
Password:
==========================================================
____ ___ __ ______ _____ ____ _ _
| _ \| _ \ \ \ / / _ \_ _| __ _|___ \| || |
|| | || ||____\ \ /\ / /| |_) || | \ \ / / __) | || |_
||_| ||_||_____\ V V / | _ < | | \ V / / __/|__ _|
|___/|___/ \_/\_/ |_| \_\|_| \_/ |_____| |_|
DD-WRT v24-sp2
http://www.dd-wrt.com
==========================================================
BusyBox v1.13.4 (2009-12-12 13:51:39 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.
root@DD-WRT:~# dmesg
Linux version 2.6.24.111 (eko@dd-wrt) (gcc version 4.1.2) #184 Sat Dec 12 13:54:26 CET 2009
CPU revision is: 00029008
Setting the PFC to its default value
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
Normal zone: 32 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 4064 pages, LIFO batch:0
Movable zone: 0 pages used for memmap
Built 1 zonelists in Zone order. Total pages: 4064
Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (19 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (30 instructions).
PID hash table entries: 64 (order: 6, 256 bytes)
CPU: BCM5352 rev 0 at 200 MHz
Using 100.000 MHz high precision timer.
console [ttyS0] enabled
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 11140k/16384k available (3110k kernel code, 5244k reserved, 1473k data, 144k init, 0k highmem)
Calibrating delay loop... 199.47 BogoMIPS (lpj=997376)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Generic PHY: Registered new driver
PCI: no core
PCI: Fixing up bus 0
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
WHR-G54S / WHR-HP-G54 GPIO Init
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered
io scheduler deadline registered (default)
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PCI: Setting latency timer of device 0000:00:01.0 to 64
eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 5.10.56.27
PCI: Setting latency timer of device 0000:00:05.0 to 64
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x400000 at 0x1c000000
bootloader size: 262144
Physically mapped flash: Filesystem type: squashfs, size=0x2235a0
partition size = 2256896
Updating TRX offsets and length:
old trx = [0x0000001c, 0x000009a8, 0x00149000], len=0x0036d000 crc32=0xe3e24524
new trx = [0x0000001c, 0x000009a8, 0x00149000], len=0x00370000 crc32=0x10485cf2
Done
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x003f0000 : "linux"
0x00189000-0x003b0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x003f0000-0x00400000 : "nvram"
0x003b0000-0x003f0000 : "ddwrt"
sflash not supported on this router
Broadcom Watchdog Timer: 0.07 initialized.
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP scalable registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Welcome to PF_RING 3.2.1
(C) 2004-06 L.Deri
NET: Registered protocol family 27
PF_RING: bucket length 128 bytes
PF_RING: ring slots 4096
PF_RING: sample rate 1 [1=no sampling]
PF_RING: capture TX No [RX only]
PF_RING: transparent mode Yes
PF_RING initialized correctly.
PF_RING: registered /proc/net/pf_ring/
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
decode 1f02
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 144k freed
roboswitch: Probing device eth0: found!
br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
Algorithmics/MIPS FPU Emulator v1.5
device vlan0 entered promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
br0: port 2(eth1) entering learning state
br0: port 1(vlan0) entering learning state
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
br0: topology change detected, propagating
br0: port 1(vlan0) entering forwarding state
device vlan1 entered promiscuous mode
device vlan1 left promiscuous mode
etherip: Ethernet over IPv4 tunneling driver
root@DD-WRT:~# 技術問題請於論壇上集眾人之力公開討論，感恩
離線
相關討論主題
| 主題 | 回覆 | 點閱 | 最後發表 |
|---|---|---|---|
|
[DD-WRT] 2.4.36 Kernel Modules 作者 hippo
|
0 | 5803 | 2008-12-24 23:56:26 作者 hippo |
