#1 2007-11-27 16:19:15
PCI NAS-01G 改機網路資源
如果您已做好準備踏入改機領域，底下有一些優質的網路資源提供大家參考。
入門教學：
支援BT的窮人NAS-PCI NAS-01G
PCI NAS-01G安裝Debian Linux的流程教學
[Nas-01g] 變身 Debian
原廠資源：
NAS-01G台灣驅動程式下載區
NAS-01G日本驅動程式下載區
台灣原廠FAQ知識庫
本篇將不定期更新，也歡迎同學提供資訊 
NAS-01G:/# cat /proc/cpuinfo
cpu : 82xx
revision : 16.20 (pvr 8081 1014)
bogomips : 176.94
vendor : Motorola
machine : MPC8241
processor : PVID: 0x80811014, vendor: Motorola
NAS-01G:/# cat /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 63549440 62255104 1294336 0 14495744 34086912
Swap: 551084032 24379392 526704640
MemTotal: 62060 kB
MemFree: 1264 kB
MemShared: 0 kB
Buffers: 14156 kB
Cached: 32292 kB
SwapCached: 996 kB
Active: 17460 kB
Inactive: 33504 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 62060 kB
LowFree: 1264 kB
SwapTotal: 538168 kB
SwapFree: 514360 kB
NAS-01G:/# dmesg
Memory BAT mapping: BAT2=64Mb, BAT3=0Mb, residual: 0Mb
Linux version 2.4.21 (hearn@MARS-V) (gcc version 3.2.3) #1 Wed Jan 10 10:31:54 CST 2007
Motorola PMC8241
PORTING by Premier Microelectronics Development
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: ethaddr=00:90:CC:E3:A8:41
sizeof(OpenPIC_Reg)=16
OpenPIC Version 1.2 (1 CPUs and 138 IRQ sources) at fc040000
Decrementer frequency = 133.000000 MHz
Warning: real time clock seems stuck!
Calibrating delay loop... 176.94 BogoMIPS
Memory: 61032k available (1740k kernel code, 964k data, 252k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page cache: 64MB memory, maximum pages = 5120, maximum inactive pages = 300
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
NTFS driver v1.1.22 [Flags: R/O]
NH230_gpio: NH200 GPIO setting ...
Trying to free free IRQ20
NH230_gpio: Get the IRQ SUCCESS !!
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xfc004500 (irq = 137) is a ST16650
RTC: character device (/dev/rtc) driver v1.00 (01/22/2005) is registered
PCF8563 Real-Time Clock Driver, $Revision: 1.15 $
RAMDISK driver initialized: 16 RAM disks of 193840K size 1024 blocksize
loop: loaded (max 8 devices)
RTL8169s/8110s: RTL8169S: NAPI enabled
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: RTL8169s/8110s Gigabit Ethernet driver 2.2-R5 (09/05/2005) at 0xc5000e00, 00:90:cc:e3:a8:41, IRQ 17
eth0: Auto-negotiation Enabled.
eth0: 100Mbps Full-duplex operation.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
IT8211: IDE controller at PCI slot 00:10.0
IT8211: chipset revision 17
IT8211: not 100% native mode: will probe irqs later
IT8212: wait 8 seconds for hard disk ready before initialize IT8212 after cold boot.
........ Done
ide0: BM-DMA at 0xbffed0-0xbffed7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xbffed8-0xbffedf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: WDC WD5000AAJB-00YRA0, ATA DISK drive
blk: queue c02de860, I/O limit 4095Mb (mask 0xffffffff)
Probing IDE interface ide1...
ide0 at 0xbffef8-0xbffeff,0xbffef6 on irq 18
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 976773168 sectors (500108 MB) w/8192KiB Cache, CHS=60801/255/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2
SCSI subsystem driver Revision: 1.00
physmap flash device: 400000 at ffc00000
Amd/Fujitsu Extended Query Table v3.3 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Using physmap partition definition
Creating 8 MTD partitions on "Physically mapped flash":
0x00300000-0x00320000 : "Boot-loader"
0x00000000-0x00004000 : "Boot CFG"
0x00004000-0x00006000 : "POST Result"
0x00008000-0x00010000 : "Linux CFG"
0x00006000-0x00008000 : "Reserved"
0x00010000-0x00190000 : "Linux"
0x00190000-0x00300000 : "RAM disk #2"
0x00320000-0x00400000 : "RAM disk #1 (root)"
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:0e.2: NEC Corporation USB 2.0
ehci_hcd 00:0e.2: irq 19, pci mem c5004f00
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:0e.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:0e.2 PCI cache line size corrected to 32.
ehci_hcd 00:0e.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 5 ports detected
host/usb-uhci.c: $Revision: 1.275 $ time 10:34:09 Jan 10 2007
host/usb-uhci.c: High bandwidth mode enabled
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
host/usb-ohci.c: USB OHCI at membase 0xc5006000, IRQ 19
host/usb-ohci.c: usb-00:0e.0, NEC Corporation USB
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
host/usb-ohci.c: USB OHCI at membase 0xc5008000, IRQ 19
host/usb-ohci.c: usb-00:0e.1, NEC Corporation USB (#2)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 772k freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 252k init
EXT3 FS 2.4-0.9.19, 19 August 2002 on ramdisk(1,0), internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
ext3_orphan_cleanup: deleting unreferenced inode 13582350
ext3_orphan_cleanup: deleting unreferenced inode 13582349
ext3_orphan_cleanup: deleting unreferenced inode 13582348
ext3_orphan_cleanup: deleting unreferenced inode 13582347
ext3_orphan_cleanup: deleting unreferenced inode 13582346
EXT3-fs: ide0(3,1): 5 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 538168k swap-space (priority -1)
IDE sleep mode is enabled.
NAS-01G:/#最後修改： Aven (2009-11-21 20:53:35)
技術問題請於論壇上集眾人之力公開討論，感恩
離線
