數位天堂

剛剛逛 Tomato網站，發現 v138 MultiWAN for all routers 又出來了...

+++

[RELEASE] 138
All versions:
– busybox: update to 1.25.0
– busybox: wget – add TLS SNI support via openssl s_client – Jeremy Chadwick
– Miniupnpd: update to 2.0
– NTFS-3G driver update to 2016.2.22
– OpenSSL: updated to 1.0.2h
– OpenSSL: add s_client to mipsel`s images
– dropbear: updated to 2016.74 – AndreDVJ
– dropbear: fixes and improvements -AndreDVJ
– dropbear: fix some PATH
– libcurl: updated to 7.49.1 – AndreDVJ
– libsodium: updated to 1.0.10 – AndreDVJ
– igmpproxy: latest patches as of April 27th. 2016 – AndreDVJ
– libncurses: updated to 6.0 – AndreDVJ
– libnfsidmap: updated to 0.25 – AndreDVJ
– spawn-fcgi: updated to 1.6.4 – AndreDVJ & Shibby
– dnsmasq: updated to 2.76 – AndreDVJ & Shibby
– nano: updated to 2.6.1 – AndreDVJ
– libusb10: updated to 1.0.9 – AndreDVJ
– libevent: updated to 2.0.22 – AndreDVJ
– dnscrypt: updated to 1.6.1 – AndreDVJ
– gmp: updated to 6.1.0 – AndreDVJ
– nettle: updated to 3.2 – AndreDVJ
– MWAN: write failover state to /tmp/wan.failover file
– MWAN: be sure we use correct dns servers for failover when primary wan failed
– DDNS: allow select WANs for DDNS services
– 4G: better Signal Strength detection
– Switch entware (obsolete) to entware-ng
– Revert „Asus RT-N16: fix vlan order” – tvlz
– VLAN GUI: updates – tvlz
– IPv6:Fix „ipv6_prefix_length” range checking – tvlz
– rc/qoc.c: some fixes – tvlz
– Fix for ipv6 6rd – Magister
– IPv6: Fix TCP MSS Clamping, move to mangle table – tvlz
– Fix QOS – make QOS work with IPv6 – tvlz
– Allow Incoming IPv6 IPSec by default – tvlz
– Fix renewal of IA NA – tvlz
– EHCI: fix direction handling for interrupt data toggles – Alan Stern

ARM only
– Add support for Netgear R6400
– Add exFAT support – oneleft & Shibby
– Kernel: updates for tcp_cubic – AndreDVJ
– Updated e2fsprogs to 1.43 – AndreDVJ
– Use kernel ext4 driver for all ext2/3/4 filesystems – nikk gitanes & AndreDVJ
– R1D: support updates – nikk gitanes & AndreDVJ
– Updated wireless settings for R6250/R6300v2/R7000 – AndreDVJ
– Driver: update Linux Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller – AndreDVJ
– Added Linksys EA6900 gpio addresses, and updated Huawei WS880 gpio address for USB2 LED – AndreDVJ

最後修改： geneo (2016-08-06 00:28:12)

我比較希望他能較完善的去支援3G Modem，我的AC68U刷Merlin-ASUS，手機一插上去就能偵測到了，馬上就能雙WAN疊加流量。
Tomato的好像還得自己弄driver進去哪？有人試過比較簡便的方法嗎？

先用130版的，待權限夠了以後再來嘗試132

這次138中文化更新很快
138是個大更新，
感謝持續更新Tomato的中文化韌體

哇...感謝版大，在這裡成長挖掘，從中文用到後來都刷英文版，目前AP是用NetGear R7000。潛水很久了，浮上來感謝貴版，繼續潛水^_