數位天堂

使用者工具

網站工具

足跡:
mcs-ln2sps

差異處

這裏顯示兩個版本的差異處。


—mcs-ln2sps [2012/03/31 03:14] (目前版本) – 建立 - 外部編輯 127.0.0.1
行 1: 行 1:
 +====== 圖片 ======
 +{{http://digiland.tw/uploads/614_akitio_mini_5-1.jpg}}
 +{{http://digiland.tw/uploads/614_akitio_mini_6-1.jpg}}
 +{{http://digiland.tw/uploads/614_akitio_mini_7-1.jpg}}
 +{{http://digiland.tw/uploads/614_akitio_mini_8.jpg}}
 +===== 主要元件 =====
 +  * CPU: PLX NAS7821
 +  * NAND: 海力士 HY27UF082G2B, 256MB
 +  * RAM: 海力士 HY5PS1G831C 二顆, 共256MB
 +  * PHY: 昱瑞 RTL8211D
 +  * RTC: 意法半導體 M41T0
 +====== 訊息 ======
 +<code>
 +Stage-1 Bootloader 一  8月 30 10:55:36 CST 2010
 +Attempting to set PLLA to 700MHz ...
 +  plla_ctrl0 : 0x0000000A
 +  plla_ctrl1 : 0x000E0000
 +  plla_ctrl2 : 0x001B01A0
 +  plla_ctrl3 : 0x00000016
 +PLLA Set
  
 +Setup memory, testing
 +Reading NAND, Image 0
 +  Hdr len: 0x0001AB60
 +  Hdr CRC: 0xAF5314CA
 + OK
 +
 +
 +U-Boot 1.1.2 (Mar  2 2011 - 10:36:51)
 +
 +U-Boot code: 60D00000 -> 60D1AB60  BSS: -> 60D1F218
 +RAM Configuration:
 +        Bank #0: 60000000 256 MB
 +SRAM Configuration:
 +        64KB at 0x50000000
 +NAND:256 MiB
 +*** Warning - bad CRC, using default environment
 +
 +In:    serial
 +Out:   serial
 +Err:   serial
 +Setting Linux mem= boot arg value
 +Reading upgrade flag from NAND address 0x01ec0000 : 0
 +Hit any key to stop autoboot:  0
 +Extinguish LED
 +
 +Loading from device 0: 256MiB 3,3V 8-bit (offset 0x440000)
 +   Image Name:   Linux-2.6.31.14-fast-20110422
 +   Image Type:   ARM Linux Kernel Image (uncompressed)
 +   Data Size:    3078316 Bytes =  2.9 MB
 +   Load Address: 60008000
 +   Entry Point:  60008000
 +## Booting image at 60500000 ...
 +   Image Name:   Linux-2.6.31.14-fast-20110422
 +   Image Type:   ARM Linux Kernel Image (uncompressed)
 +   Data Size:    3078316 Bytes =  2.9 MB
 +   Load Address: 60008000
 +   Entry Point:  60008000
 +   Verifying Checksum ... OK
 +OK
 +
 +Starting kernel ...
 +
 +Uncompressing Linux..................................................................................................................................................................................... done, booting the kernel.
 +Linux version 2.6.31.14-fast-20110422 (root@thom) (gcc version 4.4.2 20091019 (Red Hat 4.4.2-5) (GCC) ) #1 SMP Thu May 19 11:52:32 CST 2011
 +CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387f
 +CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
 +Machine: Oxsemi NAS
 +1 memory region
 +Ignoring unrecognised tag 0x00000000
 +Memory policy: ECC disabled, Data cache writealloc
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
 +Kernel command line: root=ubi0:rootfs ubi.mtd=2,512 rootfstype=ubifs console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=256M poweroutage=yes
 +PID hash table entries: 1024 (order: 10, 4096 bytes)
 +Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
 +Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
 +Memory: 256MB = 256MB total
 +Memory: 253696KB available (5280K code, 311K data, 148K init, 0K highmem)
 +SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 +Hierarchical RCU implementation.
 +NR_IRQS:96
 +OX820_RPS_init_irq: interrupts 64 to 96
 +Console: colour dummy device 80x30
 +console [ttyS0] enabled
 +Calibrating delay loop... 279.34 BogoMIPS (lpj=1396736)
 +Security Framework initialized
 +Mount-cache hash table entries: 512
 +CPU: Testing write buffer coherency: ok
 +Calibrating local timer... 349.98MHz.
 +CPU1: Booted secondary processor
 +Calibrating delay loop... 279.34 BogoMIPS (lpj=1396736)
 +Brought up 2 CPUs
 +SMP: Total of 2 processors activated (558.69 BogoMIPS).
 +NET: Registered protocol family 16
 +Number of DMA channels = 4, version = 4
 +Reserving a DMA channel for ODRB
 +Allocating 645 SRAM generic DMA descriptors
 +bio: create slab <bio-0> at 0
 +SCSI subsystem initialized
 +usbcore: registered new interface driver usbfs
 +usbcore: registered new interface driver hub
 +usbcore: registered new device driver usb
 +cfg80211: Calling CRDA to update world regulatory domain
 +NET: Registered protocol family 2
 +Switched to NOHz mode on CPU #0
 +IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
 +TCP established hash table entries: 8192 (order: 4, 65536 bytes)
 +Switched to NOHz mode on CPU #1
 +TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 +TCP: Hash tables configured (established 8192 bind 8192)
 +TCP reno registered
 +NET: Registered protocol family 1
 +Create fragment cache
 +fuse init (API version 7.12)
 +SGI XFS with security attributes, large block/inode numbers, no debug enabled
 +msgmni has been set to 496
 +alg: No test for stdrng (krng)
 +io scheduler noop registered
 +io scheduler anticipatory registered
 +io scheduler deadline registered
 +io scheduler cfq registered (default)
 +Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
 +serial8250: ttyS0 at MMIO 0x44200000 (irq = 55) is a 16550A
 +brd: module loaded
 +loop: module loaded
 +ox820sata: OX820 sata core.
 +scsi0 : oxnassata
 +scsi1 : oxnassata
 +ata1: SATA max UDMA/133 irq 50
 +ata2: SATA max UDMA/133 irq 50
 +ata1: SATA link down (SStatus 0 SControl 300)
 +ata2: SATA link down (SStatus 0 SControl 300)
 +NAND device: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix NAND 256MiB 3,3V 8-bit)
 +Scanning device for bad blocks
 +Creating 2 MTD partitions on "NAND 256MiB 3,3V 8-bit":
 +0x000000000000-0x0000026c0000 : "Boot partition"
 +0x0000026c0000-0x000010000000 : "Data Partition"
 +UBI: attaching mtd2 to ubi0
 +UBI: physical eraseblock size:   131072 bytes (128 KiB)
 +UBI: logical eraseblock size:    129024 bytes
 +UBI: smallest flash I/O unit:    2048
 +UBI: sub-page size:              512
 +UBI: VID header offset:          512 (aligned 512)
 +UBI: data offset:                2048
 +UBI: attached mtd2 to ubi0
 +UBI: MTD device name:            "Data Partition"
 +UBI: MTD device size:            217 MiB
 +UBI: number of good PEBs:        1738
 +UBI: number of bad PEBs:         0
 +UBI: max. allowed volumes:       128
 +UBI: wear-leveling threshold:    4096
 +UBI: number of internal volumes: 1
 +UBI: number of user volumes:     1
 +UBI: available PEBs:             0
 +UBI: total number of reserved PEBs: 1738
 +UBI: number of PEBs reserved for bad PEB handling: 17
 +UBI: max/mean erase counter: 3/0
 +UBI: image sequence number: 1229925112
 +UBI: background thread "ubi_bgt0d" started, PID 398
 +Probing for Synopsis GMAC, unit 0
 +eth0: use mtd hwaddr
 +eth0: Tuning GMAC 0 RGMII timings
 +eth0: PHY is Realtek RTL8211D, type 0x001cc914
 +eth0: GMAC ver = 53, vendor ver = 18 at 0xe1400000, IRQ 40
 +eth0: Found PHY at address 3, type 0x001cc914 -> 10/100/1000
 +eth0: Ethernet addr: xx:xx:xx:xx:xx:xx
 +probe() eth0: Leon x2 clock
 +tun: Universal TUN/TAP device driver, 1.6
 +tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
 +ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 +Start USB clocks
 +oxnas-ehci oxnas-ehci.0: OXNAS EHCI Host Controller
 +oxnas-ehci oxnas-ehci.0: new USB bus registered, assigned bus number 1
 +oxnas-ehci oxnas-ehci.0: irq 39, io mem 0x00000000
 +oxnas-ehci oxnas-ehci.0: USB 0.0 started, EHCI 1.00
 +usb usb1: configuration #1 chosen from 1 choice
 +hub 1-0:1.0: USB hub found
 +hub 1-0:1.0: 2 ports detected
 +Initializing USB Mass Storage driver...
 +usbcore: registered new interface driver usb-storage
 +USB Mass Storage support registered.
 +mice: PS/2 mouse device common for all mice
 +IRQ 53 uses trigger mode 0; requested 3
 +input: gpio-keys as /devices/platform/gpio-keys/input/input0
 +irq 54: nobody cared (try booting with the "irqpoll" option)
 +[<c0032bb0>] (unwind_backtrace+0x0/0xe8) from [<c007992c>] (__report_bad_irq+0x74/0xa4)
 +[<c007992c>] (__report_bad_irq+0x74/0xa4) from [<c0079adc>] (note_interrupt+0x180/0x1ec)
 +[<c0079adc>] (note_interrupt+0x180/0x1ec) from [<c007a484>] (handle_level_irq+0x100/0x128)
 +[<c007a484>] (handle_level_irq+0x100/0x128) from [<c002d058>] (asm_do_IRQ+0x58/0xac)
 +[<c002d058>] (asm_do_IRQ+0x58/0xac) from [<c002dbf8>] (__irq_svc+0x38/0xc0)
 +Exception stack(0xcf813b48 to 0xcf813b90)
 +3b40:                   cf813b90 ffff8bf2 0000000a 00000000 00000000 00000102
 +3b60: cf812000 c0570040 00000000 c05a3f20 c00258b8 c0570040 00000000 cf813b90
 +3b80: c00539fc c0053894 20000113 ffffffff
 +[<c002dbf8>] (__irq_svc+0x38/0xc0) from [<c0053894>] (__do_softirq+0x58/0x140)
 +[<c0053894>] (__do_softirq+0x58/0x140) from [<c00539fc>] (irq_exit+0x80/0x9c)
 +[<c00539fc>] (irq_exit+0x80/0x9c) from [<c002d05c>] (asm_do_IRQ+0x5c/0xac)
 +[<c002d05c>] (asm_do_IRQ+0x5c/0xac) from [<c002dbf8>] (__irq_svc+0x38/0xc0)
 +Exception stack(0xcf813bf0 to 0xcf813c38)
 +3be0:                                     00000000 60000013 e500001c 00000000
 +3c00: c0575474 c05aafc8 00000029 c05aae80 00000000 00000000 60000013 00000000
 +3c20: 00000000 cf813c38 c0037d00 c025d4d4 20000013 ffffffff
 +[<c002dbf8>] (__irq_svc+0x38/0xc0) from [<c025d4d4>] (gpio_direction_output+0xcc/0xec)
 +[<c025d4d4>] (gpio_direction_output+0xcc/0xec) from [<c02ee358>] (i2c_start+0x18/0x44)
 +[<c02ee358>] (i2c_start+0x18/0x44) from [<c02ee9e4>] (bit_xfer+0x24/0x488)
 +[<c02ee9e4>] (bit_xfer+0x24/0x488) from [<c02ec5e4>] (i2c_transfer+0xb0/0xf0)
 +[<c02ec5e4>] (i2c_transfer+0xb0/0xf0) from [<c02ec8a0>] (i2c_smbus_xfer+0x27c/0x544)
 +[<c02ec8a0>] (i2c_smbus_xfer+0x27c/0x544) from [<c02ecc08>] (i2c_smbus_read_i2c_block_data+0x4c/0x70)
 +[<c02ecc08>] (i2c_smbus_read_i2c_block_data+0x4c/0x70) from [<c03f31b4>] (ds1307_probe+0x354/0x5fc)
 +[<c03f31b4>] (ds1307_probe+0x354/0x5fc) from [<c02ec3d4>] (i2c_device_probe+0x98/0xb0)
 +[<c02ec3d4>] (i2c_device_probe+0x98/0xb0) from [<c027ffb0>] (driver_probe_device+0x78/0x164)
 +[<c027ffb0>] (driver_probe_device+0x78/0x164) from [<c027f5d4>] (bus_for_each_drv+0x60/0x8c)
 +[<c027f5d4>] (bus_for_each_drv+0x60/0x8c) from [<c02801ec>] (device_attach+0x5c/0x74)
 +[<c02801ec>] (device_attach+0x5c/0x74) from [<c027f3e8>] (bus_probe_device+0x24/0x44)
 +[<c027f3e8>] (bus_probe_device+0x24/0x44) from [<c027df88>] (device_add+0x3f0/0x4d8)
 +[<c027df88>] (device_add+0x3f0/0x4d8) from [<c02ed604>] (i2c_new_device+0xbc/0x124)
 +[<c02ed604>] (i2c_new_device+0xbc/0x124) from [<c02ee064>] (i2c_register_adapter+0x124/0x1c4)
 +[<c02ee064>] (i2c_register_adapter+0x124/0x1c4) from [<c02ee1b4>] (i2c_add_numbered_adapter+0xb0/0xc8)
 +[<c02ee1b4>] (i2c_add_numbered_adapter+0xb0/0xc8) from [<c03f35d4>] (i2c_gpio_probe+0x178/0x22c)
 +[<c03f35d4>] (i2c_gpio_probe+0x178/0x22c) from [<c0280d98>] (platform_drv_probe+0x18/0x1c)
 +[<c0280d98>] (platform_drv_probe+0x18/0x1c) from [<c027ffb0>] (driver_probe_device+0x78/0x164)
 +[<c027ffb0>] (driver_probe_device+0x78/0x164) from [<c0280128>] (__driver_attach+0x8c/0x90)
 +[<c0280128>] (__driver_attach+0x8c/0x90) from [<c027f8a4>] (bus_for_each_dev+0x60/0x8c)
 +[<c027f8a4>] (bus_for_each_dev+0x60/0x8c) from [<c027f17c>] (bus_add_driver+0x9c/0x230)
 +[<c027f17c>] (bus_add_driver+0x9c/0x230) from [<c02803bc>] (driver_register+0x78/0x138)
 +[<c02803bc>] (driver_register+0x78/0x138) from [<c001d3d0>] (i2c_gpio_init+0xc/0x30)
 +[<c001d3d0>] (i2c_gpio_init+0xc/0x30) from [<c002d4bc>] (do_one_initcall+0x30/0x1b4)
 +[<c002d4bc>] (do_one_initcall+0x30/0x1b4) from [<c0008554>] (kernel_init+0x164/0x1f0)
 +[<c0008554>] (kernel_init+0x164/0x1f0) from [<c002eac0>] (kernel_thread_exit+0x0/0x8)
 +handlers:
 +[<c02e97f4>] (gpio_keys_isr+0x0/0x8c)
 +Disabling IRQ #54
 +rtc-ds1307 0-0068: rtc core: registered m41t00 as rtc0
 +i2c-gpio i2c-gpio.0: using pins 41 (SDA) and 42 (SCL)
 +md: linear personality registered for level -1
 +md: raid0 personality registered for level 0
 +md: raid1 personality registered for level 1
 +Registered led device: hddaerr
 +Registered led device: hddberr
 +Registered led device: system
 +Registered led device: firmware
 +Registered led device: usbcopy
 +TCP cubic registered
 +NET: Registered protocol family 10
 +NET: Registered protocol family 17
 +RPC: Registered udp transport module.
 +RPC: Registered tcp transport module.
 +rtc-ds1307 0-0068: setting system clock to 2012-01-27 08:09:55 UTC (1327651795)
 +md: Waiting for all devices to be available before autodetect
 +md: If you don't use raid, use raid=noautodetect
 +md: Autodetecting RAID arrays.
 +md: Scanned 0 and added 0 devices.
 +md: autorun ...
 +md: ... autorun DONE.
 +UBIFS: mounted UBI device 0, volume 0, name "rootfs"
 +UBIFS: file system size:   217921536 bytes (212814 KiB, 207 MiB, 1689 LEBs)
 +UBIFS: journal size:       9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
 +UBIFS: media format:       w4/r0 (latest is w4/r0)
 +UBIFS: default compressor: lzo
 +UBIFS: reserved for root:  0 bytes (0 KiB)
 +VFS: Mounted root (ubifs filesystem) on device 0:10.
 +Freeing init memory: 148K
 +                Welcome to Fedora
 +                Press 'I' to enter interactive startup.
 +Starting udev: [  OK  ]
 +Setting hostname isharing:  [  OK  ]
 +Checking filesystems
 +Checking all file systems.
 +[  OK  ]
 +Mounting local filesystems:  ntfs-3g: Failed to access volume '/dev/sda2': No such file or directory
 +
 +ntfs-3g 2009.4.4 integrated FUSE 27 - Third Generation NTFS Driver
 +
 +Copyright (C) 2005-2007 Yura Pakhuchiy
 +Copyright (C) 2006-2009 Szabolcs Szakacsits
 +Copyright (C) 2007-2009 Jean-Pierre Andre
 +Copyright (C) 2009 Erik Larsson
 +
 +Usage:    ntfs-3g [-o option[,...]] <device|image_file> <mount_point>
 +
 +Options:  ro (read-only mount), remove_hiberfile, uid=, gid=,
 +          umask=, fmask=, dmask=, streams_interface=.
 +          Please see the details in the manual (type: man ntfs-3g).
 +
 +Example: ntfs-3g /dev/sda1 /mnt/windows
 +
 +Ntfs-3g news, support and information:  http://ntfs-3g.org
 +mount: special device /dev/md2 does not exist
 +[FAILED]
 +Enabling /etc/fstab swaps:  [  OK  ]
 +Entering non-interactive startup
 +Restoring /var/log to tmpfs:
 +  mount tmpfs on /var/log...
 +  extract backup logs to /var/log...
 +7 blocks
 +
 +Bringing up loopback interface:  [  OK  ]
 +Bringing up interface eth0:
 +Determining IP information for eth0... done.
 +[  OK  ]
 +Starting portreserve: [  OK  ]
 +Starting system logger: [  OK  ]
 +Starting rpcbind: [  OK  ]
 +Starting NFS statd: [  OK  ]
 +Starting RPC idmapd: [  OK  ]
 +Starting system message bus: [  OK  ]
 +Starting Avahi daemon... [  OK  ]
 +Starting cups: [  OK  ]
 +Mounting other filesystems:  ntfs-3g: Failed to access volume '/dev/sda2': No such file or directory
 +
 +ntfs-3g 2009.4.4 integrated FUSE 27 - Third Generation NTFS Driver
 +
 +Copyright (C) 2005-2007 Yura Pakhuchiy
 +Copyright (C) 2006-2009 Szabolcs Szakacsits
 +Copyright (C) 2007-2009 Jean-Pierre Andre
 +Copyright (C) 2009 Erik Larsson
 +
 +Usage:    ntfs-3g [-o option[,...]] <device|image_file> <mount_point>
 +
 +Options:  ro (read-only mount), remove_hiberfile, uid=, gid=,
 +          umask=, fmask=, dmask=, streams_interface=.
 +          Please see the details in the manual (type: man ntfs-3g).
 +
 +Example: ntfs-3g /dev/sda1 /mnt/windows
 +
 +Ntfs-3g news, support and information:  http://ntfs-3g.org
 +mount: special device /dev/md2 does not exist
 +[FAILED]
 +Retrigger failed udev events[  OK  ]
 +Starting sshd: [  OK  ]
 +Starting xinetd: [  OK  ]
 +ntpdate: Synchronizing with time server: [  OK  ]
 +Syncing hardware clock to system time [  OK  ]
 +Starting ntpd: [  OK  ]
 +Starting NAS (nas):  fastcgi buttons diskmon
 +Starting lighttpd: [  OK  ]
 +Starting MiniDLNA (minidlna): [  OK  ]
 +Starting sockproxy-daemon:
 +[  OK  ] atd: [  OK  ]
 +Starting DAAP server: [  OK  ]
 +Starting NAS LED (nasled): product was "akitio"
 + nas-service
 +Starting smartd: [  OK  ]
 +
 +Fedora release 12 (Constantine)
 +Kernel 2.6.31.14-fast-20110422 on an armv6l (/dev/ttyS0)
 +
 +isharing login:
 +</code>
 +<code>
 +$ cat /proc/cpuinfo
 +Processor       : ARMv6-compatible processor rev 5 (v6l)
 +processor       : 0
 +BogoMIPS        : 279.34
 +
 +processor       : 1
 +BogoMIPS        : 279.34
 +
 +Features        : swp half thumb fastmult edsp java
 +CPU implementer : 0x41
 +CPU architecture: 7
 +CPU variant     : 0x0
 +CPU part        : 0xb02
 +CPU revision    : 5
 +
 +Hardware        : Oxsemi NAS
 +Revision        : 0000
 +Serial          : 0000000000000000
 +</code>
 +<code>
 +$ cat /proc/meminfo
 +MemTotal:         254112 kB
 +MemFree:          152084 kB
 +Buffers:             752 kB
 +Cached:            28808 kB
 +SwapCached:            0 kB
 +Active:            48792 kB
 +Inactive:          15208 kB
 +Active(anon):      34692 kB
 +Inactive(anon):        0 kB
 +Active(file):      14100 kB
 +Inactive(file):    15208 kB
 +Unevictable:           0 kB
 +Mlocked:               0 kB
 +SwapTotal:             0 kB
 +SwapFree:              0 kB
 +Dirty:                 0 kB
 +Writeback:             0 kB
 +AnonPages:         34492 kB
 +Mapped:            11500 kB
 +Slab:               7944 kB
 +SReclaimable:       3264 kB
 +SUnreclaim:         4680 kB
 +PageTables:          988 kB
 +NFS_Unstable:          0 kB
 +Bounce:                0 kB
 +WritebackTmp:          0 kB
 +CommitLimit:      127056 kB
 +Committed_AS:     165540 kB
 +VmallocTotal:       8192 kB
 +VmallocUsed:        1172 kB
 +VmallocChunk:       6428 kB
 +</code>
 +<code>
 +$ cat /proc/mtd
 +dev:    size   erasesize  name
 +mtd0: 10000000 00020000 "NAND 256MiB 3,3V 8-bit"
 +mtd1: 026c0000 00020000 "Boot partition"
 +mtd2: 0d940000 00020000 "Data Partition"
 +</code>
 +<code>
 +$ uname -a
 +Linux isharing 2.6.31.14-fast-20110422 #1 SMP Thu May 19 11:52:32 CST 2011 armv6l armv6l armv6l GNU/Linux
 +</code>
 +<code>
 +$ cat /proc/cmdline
 +root=ubi0:rootfs ubi.mtd=2,512 rootfstype=ubifs console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=256M poweroutage=yes
 +</code>
 +<code>
 +$ cat /proc/version
 +Linux version 2.6.31.14-fast-20110422 (root@thom) (gcc version 4.4.2 20091019 (Red Hat 4.4.2-5) (GCC) ) #1 SMP Thu May 19 11:52:32 CST 2011
 +</code>
 +<code>
 +$ /lib/libc.so.6
 +GNU C Library stable release version 2.11, by Roland McGrath et al.
 +Copyright (C) 2009 Free Software Foundation, Inc.
 +This is free software; see the source for copying conditions.
 +There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
 +PARTICULAR PURPOSE.
 +Compiled by GNU CC version 4.4.2 20091019 (Red Hat 4.4.2-5).
 +Compiled on a Linux >>2.6.32-rc3-00337-gbd38193-dirty<< system on 2009-11-11.
 +Available extensions:
 +        The C stubs add-on version 2.1.2.
 +        crypt add-on version 2.1 by Michael Glad and others
 +        GNU Libidn by Simon Josefsson
 +        Native POSIX Threads Library by Ulrich Drepper et al
 +        Support for some architectures added on, not maintained in glibc core.
 +        BIND-8.2.3-T5B
 +For bug reporting instructions, please see:
 +<http://www.gnu.org/software/libc/bugs.html>.
 +</code>