本頁目錄

www.draytek.com_.upload_pdimage_mimage_30618782e431e3199cecd1a57ea6b7352010011201334742083.jpg

資訊

CPU

# cat /proc/cpuinfo

Processor       : ARM926EJ-S rev 5 (v5l)
BogoMIPS        : 133.12
Features        : swp half fastmult edsp java
CPU implementer : 0x41
CPU architecture: 5TEJ
CPU variant     : 0x0
CPU part        : 0x926
CPU revision    : 5
Cache type      : write-back
Cache clean     : cp15 c7 ops
Cache lockdown  : format C
Cache format    : Harvard
I size          : 32768
I assoc         : 4
I line length   : 32
I sets          : 256
D size          : 32768
D assoc         : 4
D line length   : 32
D sets          : 256

Hardware        : Vitesse WebRocX (Scutum)
Revision        : 4b000001
Serial          : 000000007fc99a10

記憶體

# cat /proc/meminfo

MemTotal:        62796 kB
MemFree:         40800 kB
Buffers:          2964 kB
Cached:           8580 kB
SwapCached:          0 kB
Active:           7136 kB
Inactive:         6736 kB
SwapTotal:           0 kB
SwapFree:            0 kB
Dirty:               0 kB
Writeback:           0 kB
AnonPages:        2344 kB
Mapped:           1556 kB
Slab:             3516 kB
SReclaimable:     1104 kB
SUnreclaim:       2412 kB
PageTables:        348 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:     31396 kB
Committed_AS:     6568 kB
VmallocTotal:   188416 kB
VmallocUsed:      8784 kB
VmallocChunk:   172028 kB

韌體 v1.3.0.1

核心

# uname -a

Linux Vigor2130 2.6.23.9 r1246 Wed Apr 14 15:28:51 CST 2010 armv5tejl unknown

# cat /proc/version

Linux version 2.6.23.9 (draytek@draytek-desktop) (gcc version 4.1.2) r1246 Wed Apr 14 15:28:51 CST 2010

mtd

# cat /proc/mtd

dev:    size   erasesize  name
mtd0: 00800000 00010000 "WebRocX NOR Flash"
mtd1: 00050000 00010000 "U-Boot"
mtd2: 00010000 00010000 "U-Boot Env"
mtd3: 007a0000 00010000 "firmware"
mtd4: 00690000 00010000 "rootfs"
mtd5: 000d0000 00010000 "rootfs_data"

內建 service

  1. Samba 3.0.24
  2. vsFTPd

訊息

# dmesg

Linux version 2.6.23.9 (draytek@draytek-desktop) (gcc version 4.1.2) r1246 Wed Apr 14 15:28:51 CST 2010
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: Vitesse WebRocX (Scutum)
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
  DMA zone: 128 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 16256 pages, LIFO batch:3
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
PLL clock at 266MHz
CPU clock at 266MHz
AHB clock at 133MHz
APB clock at 66MHz
Board revision: 1258291201
Built 1 zonelists in Zone order.  Total pages: 16256
Kernel command line: root=/dev/mtdblock4 ro init=/etc/preinit
PID hash table entries: 256 (order: 8, 1024 bytes)
console [ttyS0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 62640KB available (1984K code, 153K data, 92K init)
Calibrating delay loop... 133.12 BogoMIPS (lpj=665600)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16

 in draytek_init c4800000PCI clock at 33MHz
PCI: bus0: Fast back to back transfers disabled
PCI Bridge found
PCI map irq: 00:00.00 slot 0, pin 1, irq: 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
BtnDef registered on IRQ61
BtnWPS registered on IRQ47
BtnWIFI registered on IRQ46
NetWinder Floating Point Emulator V0.97 (extended precision)
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  穢 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
vitgenio: Device registered.
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x78000000 (irq = 9) is a 16550A
serial8250: ttyS1 at MMIO 0x78800000 (irq = 10) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
register netdev : lo
WebRocX NOR Flash: Found 1 x16 devices at 0x0 in 8-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
  Newer Samsung flash detected, should be compatibile with Amd/Fujitsu.
WebRocX NOR Flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 3 MTD partitions on "WebRocX NOR Flash":
0x00000000-0x00050000 : "U-Boot"
0x00050000-0x00060000 : "U-Boot Env"
0x00060000-0x00800000 : "firmware"
GROCX SPI: init
=== RETURN directly --> FIX ME ===
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
grocx-ehci grocx-ehci: grocx-ehci
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
grocx-ehci grocx-ehci: new USB bus registered, assigned bus number 1
grocx-ehci grocx-ehci: reset hcs_params 0x1210012 dbg=2 ind cc=0 pcc=0 ordered ports=2
grocx-ehci grocx-ehci: reset hcc_params 0006 thresh 0 uframes 256/512/1024 park
grocx-ehci grocx-ehci: park 0
grocx-ehci grocx-ehci: irq 24, io mem 0xfff11000
grocx-ehci grocx-ehci: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
grocx-ehci grocx-ehci: init command 010009 (park)=0 ithresh=1 period=256 RUN
grocx-ehci grocx-ehci: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: grocx-ehci
usb usb1: Manufacturer: Linux 2.6.23.9 ehci_hcd
usb usb1: SerialNumber: grocx-ehci
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: individual port power switching
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: enabling power on all ports
hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
usbcore: registered new interface driver usblp
GROCX Watchdog Timer: heartbeat 300 sec
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP vegas registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
firmware: Parsing partition map
firmware: Filesystem type: squashfs, offset=0x110000 size=0x5b5f8c
mtdsplit: Adding WebRocX partitions in 'firmware' (31,3)
Creating 1 MTD partitions on "firmware":
0x00110000-0x007a0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=6D0000, len=D0000
0x006d0000-0x007a0000 : "rootfs_data"
VFS: Mounted root (squashfs filesystem) readonly.
Freeing init memory: 92K
Please be patient, while OpenWrt loads ...
usb usb1: uevent
usb 1-0:1.0: uevent
usb 1-0:1.0: uevent
mini_fo: using base directory: /
mini_fo: using storage directory: /jffs
usb usb1: uevent
usb 1-0:1.0: uevent
usb 1-0:1.0: uevent
ocf: module license 'BSD' taints kernel.
Info: GRocX GDMA: Installed
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
SCSI subsystem initialized
module ratelimit start
module sessionlimit start
Loading Voicepump Driver.....
Can not initial Voicepump.
NTFS driver 2.1.28 [Flags: R/O MODULE].
PPP generic driver version 2.4.2
MPPE/MPPC encryption/compression module registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
IPv6 over IPv4 tunneling driver
register netdev : sit0
sit0: Disabled Privacy Extensions
pppol2tp: Unknown symbol pppox_ioctl
pppol2tp: Unknown symbol unregister_pppox_proto
pppol2tp: Unknown symbol register_pppox_proto
pppol2tp: Unknown symbol pppox_unbind_sock
register netdev : imq0
register netdev : imq1
IMQ starting with 2 devices...
IMQ driver loaded successfully.
        Hooking IMQ before NAT on PREROUTING.
        Hooking IMQ after NAT on POSTROUTING.
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip6_queue: failed to register queue handler
registering ipv6 ROUTE target
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
fuse init (API version 7.8)
fuse distribution version: 2.7.3
hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002
grocx-ehci grocx-ehci: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 1-1: new high speed USB device using grocx-ehci and address 2
grocx-ehci grocx-ehci: port 1 high speed
grocx-ehci grocx-ehci: GetStatus port 1 status 8001205 POWER sig=se0 PE CONNECT
usb 1-1: default language 0x0409
usb 1-1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
usb 1-1: uevent
usb 1-1: usb_probe_device
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: uevent
usb 1-1:1.0: uevent
hub 1-1:1.0: usb_probe_interface
hub 1-1:1.0: usb_probe_interface - got id
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
hub 1-1:1.0: standalone hub
hub 1-1:1.0: individual port power switching
hub 1-1:1.0: individual port over-current protection
hub 1-1:1.0: Single TT
hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
hub 1-1:1.0: Port indicators are supported
hub 1-1:1.0: power on to power good time: 100ms
hub 1-1:1.0: local power source is good
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ffc00100 start 255 [1/0 us]
drivers/usb/core/inode.c: creating file '002'
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
star_gsw: Loading configuration 'A'
write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:10
write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:11
write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:12
write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:13
write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:14
write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:15
write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:16
write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:17
register netdev : eth0
register netdev : eth1
register netdev : fp
open mac port 0
port 0 phy link up
port 0 already open
port 0 already open
Star SHNAT Proc Information inited
G-RocX Smart HNAT Driver v1.0.0.13 Initialed
gvid = 2 0x1 <<gvid <<16= 40000
gvid = 2 (gvid&0xFF) << 16= 20000
Open Orion Fast Path Tunnel Devic

# logread

Jan  1 00:00:05 Vigor2130 user.info kernel: mtdsplit: Adding WebRocX partitions in 'firmware' (31,3)
Jan  1 00:00:05 Vigor2130 user.notice kernel: Creating 1 MTD partitions on "firmware":
Jan  1 00:00:05 Vigor2130 user.notice kernel: 0x00110000-0x007a0000 : "rootfs"
Jan  1 00:00:05 Vigor2130 user.notice kernel: mtd: partition "rootfs" set to be root filesystem
Jan  1 00:00:05 Vigor2130 user.info kernel: mtd: partition "rootfs_data" created automatically, ofs=6D0000, len=D0000
Jan  1 00:00:05 Vigor2130 user.notice kernel: 0x006d0000-0x007a0000 : "rootfs_data"
Jan  1 00:00:05 Vigor2130 user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan  1 00:00:05 Vigor2130 user.info kernel: Freeing init memory: 92K
Jan  1 00:00:05 Vigor2130 user.warn kernel: Please be patient, while OpenWrt loads ...
Jan  1 00:00:05 Vigor2130 user.debug kernel: usb usb1: uevent
Jan  1 00:00:05 Vigor2130 user.debug kernel: usb 1-0:1.0: uevent
Jan  1 00:00:05 Vigor2130 user.debug kernel: usb 1-0:1.0: uevent
Jan  1 00:00:05 Vigor2130 user.info kernel: mini_fo: using base directory: /
Jan  1 00:00:05 Vigor2130 user.info kernel: mini_fo: using storage directory: /jffs
Jan  1 00:00:05 Vigor2130 user.debug kernel: usb usb1: uevent
Jan  1 00:00:05 Vigor2130 user.debug kernel: usb 1-0:1.0: uevent
Jan  1 00:00:05 Vigor2130 user.debug kernel: usb 1-0:1.0: uevent
Jan  1 00:00:07 Vigor2130 user.warn kernel: ocf: module license 'BSD' taints kernel.
Jan  1 00:00:07 Vigor2130 user.info : grep: /proc/bus/usb/devices: No such file or directory
Jan  1 00:00:07 Vigor2130 user.info : sh: 1: unknown operand
Jan  1 00:00:07 Vigor2130 user.info : grep: /proc/bus/usb/devices: No such file or directory
Jan  1 00:00:07 Vigor2130 user.info : sh: 1: unknown operand
Jan  1 00:00:08 Vigor2130 user.info : grep: /proc/bus/usb/devices: No such file or directory
Jan  1 00:00:08 Vigor2130 user.info : sh: 1: unknown operand
Jan  1 00:00:08 Vigor2130 user.info : grep: /proc/bus/usb/devices: No such file or directory
Jan  1 00:00:08 Vigor2130 user.info : sh: 1: unknown operand
Jan  1 00:00:08 Vigor2130 user.info kernel: Info: GRocX GDMA: Installed
Jan  1 00:00:10 Vigor2130 user.info kernel: NET: Registered protocol family 10
Jan  1 00:00:10 Vigor2130 user.info kernel: lo: Disabled Privacy Extensions
Jan  1 00:00:10 Vigor2130 user.notice kernel: SCSI subsystem initialized
Jan  1 00:00:11 Vigor2130 user.warn kernel: module ratelimit start
Jan  1 00:00:11 Vigor2130 user.warn kernel: module sessionlimit start
Jan  1 00:00:11 Vigor2130 user.warn kernel: Loading Voicepump Driver.....
Jan  1 00:00:12 Vigor2130 user.warn kernel: Can not initial Voicepump.
Jan  1 00:00:12 Vigor2130 user.info kernel: NTFS driver 2.1.28 [Flags: R/O MODULE].
Jan  1 00:00:12 Vigor2130 user.info : route: fscanf
Jan  1 00:00:13 Vigor2130 user.info kernel: PPP generic driver version 2.4.2
Jan  1 00:00:13 Vigor2130 user.info kernel: MPPE/MPPC encryption/compression module registered
Jan  1 00:00:13 Vigor2130 user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jan  1 00:00:13 Vigor2130 user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan  1 00:00:13 Vigor2130 user.info kernel: IPv6 over IPv4 tunneling driver
Jan  1 00:00:13 Vigor2130 user.warn kernel: register netdev : sit0^M
Jan  1 00:00:13 Vigor2130 user.info kernel: sit0: Disabled Privacy Extensions
Jan  1 00:00:14 Vigor2130 user.warn kernel: pppol2tp: Unknown symbol pppox_ioctl
Jan  1 00:00:14 Vigor2130 user.warn kernel: pppol2tp: Unknown symbol unregister_pppox_proto
Jan  1 00:00:14 Vigor2130 user.warn kernel: pppol2tp: Unknown symbol register_pppox_proto
Jan  1 00:00:14 Vigor2130 user.warn kernel: pppol2tp: Unknown symbol pppox_unbind_sock
Jan  1 00:00:15 Vigor2130 user.warn kernel: register netdev : imq0^M
Jan  1 00:00:15 Vigor2130 user.warn kernel: register netdev : imq1^M
Jan  1 00:00:15 Vigor2130 user.info kernel: IMQ starting with 2 devices...
Jan  1 00:00:15 Vigor2130 user.info kernel: IMQ driver loaded successfully.
Jan  1 00:00:15 Vigor2130 user.info kernel:     Hooking IMQ before NAT on PREROUTING.
Jan  1 00:00:15 Vigor2130 user.info kernel:     Hooking IMQ after NAT on POSTROUTING.
Jan  1 00:00:15 Vigor2130 user.info kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 00:00:16 Vigor2130 user.err kernel: ip6_queue: failed to register queue handler
Jan  1 00:00:16 Vigor2130 user.debug kernel: registering ipv6 ROUTE target
Jan  1 00:00:16 Vigor2130 user.info kernel: usbcore: registered new interface driver usbserial
Jan  1 00:00:16 Vigor2130 user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Jan  1 00:00:16 Vigor2130 user.info kernel: usbcore: registered new interface driver usbserial_generic
Jan  1 00:00:16 Vigor2130 user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Jan  1 00:00:17 Vigor2130 user.info kernel: Initializing USB Mass Storage driver...
Jan  1 00:00:17 Vigor2130 user.info kernel: usbcore: registered new interface driver usb-storage
Jan  1 00:00:17 Vigor2130 user.info kernel: USB Mass Storage support registered.
Jan  1 00:00:17 Vigor2130 user.info kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
Jan  1 00:00:17 Vigor2130 user.info kernel: usbcore: registered new interface driver option
Jan  1 00:00:17 Vigor2130 user.info kernel: drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
Jan  1 00:00:17 Vigor2130 user.warn kernel: fuse init (API version 7.8)
Jan  1 00:00:17 Vigor2130 user.warn kernel: fuse distribution version: 2.7.3
Jan  1 00:00:17 Vigor2130 user.debug kernel: hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002
Jan  1 00:00:17 Vigor2130 user.debug kernel: grocx-ehci grocx-ehci: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
Jan  1 00:00:17 Vigor2130 user.debug kernel: hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
Jan  1 00:00:17 Vigor2130 user.debug kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
Jan  1 00:00:17 Vigor2130 user.info kernel: usb 1-1: new high speed USB device using grocx-ehci and address 2
Jan  1 00:00:18 Vigor2130 user.debug kernel: grocx-ehci grocx-ehci: port 1 high speed
Jan  1 00:00:18 Vigor2130 user.debug kernel: grocx-ehci grocx-ehci: GetStatus port 1 status 8001205 POWER sig=se0 PE CONNECT
Jan  1 00:00:18 Vigor2130 user.debug kernel: usb 1-1: default language 0x0409
Jan  1 00:00:18 Vigor2130 user.debug kernel: usb 1-1: new device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:18 Vigor2130 user.info kernel: usb 1-1: Product: USB2.0 Hub
Jan  1 00:00:18 Vigor2130 user.debug kernel: usb 1-1: uevent
Jan  1 00:00:18 Vigor2130 user.debug kernel: usb 1-1: usb_probe_device
Jan  1 00:00:18 Vigor2130 user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan  1 00:00:18 Vigor2130 user.debug kernel: usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Jan  1 00:00:18 Vigor2130 user.debug kernel: usb 1-1:1.0: uevent
Jan  1 00:00:18 Vigor2130 user.debug kernel: usb 1-1:1.0: uevent
Jan  1 00:00:18 Vigor2130 user.debug kernel: hub 1-1:1.0: usb_probe_interface
Jan  1 00:00:18 Vigor2130 user.debug kernel: hub 1-1:1.0: usb_probe_interface - got id
Jan  1 00:00:18 Vigor2130 user.info kernel: hub 1-1:1.0: USB hub found
Jan  1 00:00:18 Vigor2130 user.info kernel: hub 1-1:1.0: 4 ports detected
Jan  1 00:00:18 Vigor2130 user.debug kernel: hub 1-1:1.0: standalone hub
Jan  1 00:00:18 Vigor2130 user.debug kernel: hub 1-1:1.0: individual port power switching
Jan  1 00:00:18 Vigor2130 user.debug kernel: hub 1-1:1.0: individual port over-current protection
Jan  1 00:00:18 Vigor2130 user.debug kernel: hub 1-1:1.0: Single TT
Jan  1 00:00:18 Vigor2130 user.debug kernel: hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
Jan  1 00:00:18 Vigor2130 user.debug kernel: hub 1-1:1.0: Port indicators are supported
Jan  1 00:00:18 Vigor2130 user.debug kernel: hub 1-1:1.0: power on to power good time: 100ms
Jan  1 00:00:18 Vigor2130 user.debug kernel: hub 1-1:1.0: local power source is good
Jan  1 00:00:18 Vigor2130 user.debug kernel: hub 1-1:1.0: enabling power on all ports
Jan  1 00:00:18 Vigor2130 user.debug kernel: usb 1-1: link qh256-0001/ffc00100 start 255 [1/0 us]
Jan  1 00:00:18 Vigor2130 user.debug kernel: drivers/usb/core/inode.c: creating file '002'
Jan  1 00:00:18 Vigor2130 user.debug kernel: hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
Jan  1 00:00:18 Vigor2130 user.info : =============> usr_syscall()^M
Jan  1 00:00:18 Vigor2130 user.info : set group 1 pvid = 3^M
Jan  1 00:00:18 Vigor2130 user.info : set group 2 pvid = 4^M
Jan  1 00:00:18 Vigor2130 user.info : set group 3 pvid = 5^M
Jan  1 00:00:18 Vigor2130 user.info : set group 4 pvid = 6^M
Jan  1 00:00:18 Vigor2130 user.notice kernel: star_gsw: Loading configuration 'A'
Jan  1 00:00:18 Vigor2130 user.debug kernel: write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:10
Jan  1 00:00:18 Vigor2130 user.debug kernel: write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:11
Jan  1 00:00:18 Vigor2130 user.debug kernel: write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:12
Jan  1 00:00:18 Vigor2130 user.debug kernel: write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:13
Jan  1 00:00:18 Vigor2130 user.debug kernel: write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:14
Jan  1 00:00:18 Vigor2130 user.debug kernel: write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:15
Jan  1 00:00:18 Vigor2130 user.debug kernel: write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:16
Jan  1 00:00:18 Vigor2130 user.debug kernel: write arl arl_table_entry->mac_addr ## arl_table_entry->mac_addr = 00:50:7f:xx:xx:17
Jan  1 00:00:18 Vigor2130 user.warn kernel: register netdev : eth0^M
Jan  1 00:00:18 Vigor2130 user.warn kernel: register netdev : eth1^M
Jan  1 00:00:18 Vigor2130 user.warn kernel: register netdev : fp^M
Jan  1 00:00:18 Vigor2130 user.info : grep: /proc/bus/usb/devices: No such file or directory
Jan  1 00:00:18 Vigor2130 user.info : sh: 1: unknown operand
Jan  1 00:00:18 Vigor2130 user.info : grep: /proc/bus/usb/devices: No such file or directory
Jan  1 00:00:18 Vigor2130 user.info : sh: 1: unknown operand
Jan  1 00:00:19 Vigor2130 user.info : grep: /proc/bus/usb/devices: No such file or directory
Jan  1 00:00:19 Vigor2130 user.info : sh: 1: unknown operand
Jan  1 00:00:19 Vigor2130 user.info : grep: /proc/bus/usb/devices: No such file or directory
Jan  1 00:00:19 Vigor2130 user.info : sh: 1: unknown operand
Jan  1 00:00:20 Vigor2130 user.warn kernel: open mac port 0
Jan  1 00:00:20 Vigor2130 user.warn kernel: port 0 phy link up
Jan  1 00:00:20 Vigor2130 user.info syslog: command: write 7 0 0x5 0x50
Jan  1 00:00:22 Vigor2130 user.warn kernel: port 0 already open
Jan  1 00:00:22 Vigor2130 user.warn kernel: port 0 already open
Jan  1 00:00:22 Vigor2130 user.info : udhcpc (v1.11.2) started
Jan  1 00:00:22 Vigor2130 user.notice webrocx: Applying stored switch configuration
Jan  1 00:00:24 Vigor2130 user.info : Files /etc/hosts and /tmp/hosts differ
Jan  1 00:00:25 Vigor2130 user.notice root: Updated /etc/hosts with 192.168.1.1 Vigor2130
Jan  1 00:00:26 Vigor2130 user.info : killall: igmpproxy: no process killed
Jan  1 00:00:26 Vigor2130 user.info : Sending discover...
Jan  1 00:00:26 Vigor2130 user.info : no wifi_dev or wrong wifi_dev config
Jan  1 00:00:26 Vigor2130 user.info : rt2880: Detect failed
Jan  1 00:00:28 Vigor2130 user.info : rt2880r: Detect failed
Jan  1 00:00:28 Vigor2130 user.warn kernel: Star SHNAT Proc Information inited
Jan  1 00:00:28 Vigor2130 user.warn kernel: G-RocX Smart HNAT Driver v1.0.0.13 Initialed
Jan  1 00:00:28 Vigor2130 user.warn kernel: gvid = 2 0x1 <<gvid <<16= 40000
Jan  1 00:00:28 Vigor2130 user.warn kernel: gvid = 2 (gvid&0xFF) << 16= 20000
Jan  1 00:00:28 Vigor2130 user.info kernel: Open Orion Fast Path Tunnel Device
Jan  1 00:00:28 Vigor2130 user.info : Enable SHNAT
Jan  1 00:00:29 Vigor2130 user.info : Sending discover...
Jan  1 00:00:29 Vigor2130 user.info : Loading defaults
Jan  1 00:00:29 Vigor2130 user.info : Loading synflood protection
Jan  1 00:00:30 Vigor2130 user.info : Adding custom chains
Jan  1 00:00:30 Vigor2130 user.info : Loading zones
Jan  1 00:00:31 Vigor2130 user.info : Loading rules
Jan  1 00:00:31 Vigor2130 user.info : Loading forwarding
Jan  1 00:00:31 Vigor2130 user.info : Loading redirects
Jan  1 00:00:31 Vigor2130 user.info : Loading includes
Jan  1 00:00:32 Vigor2130 user.info : Sending discover...
Jan  1 00:00:33 Vigor2130 user.notice root: adding eth0 to firewall zone lan
Jan  1 00:00:36 Vigor2130 user.info : 1970-01-01 00:00:34: (log.c.75) server started
Jan  1 00:00:39 Vigor2130 user.info : udhcpc: bind(UDP): Cannot assign requested address
Jan  1 00:00:40 Vigor2130 daemon.info dnsmasq[1630]: started, version 2.45 cachesize 150
Jan  1 00:00:40 Vigor2130 daemon.info dnsmasq[1630]: compile time options: IPv6 GNU-getopt ISC-leasefile no-DBus no-I18N TFTP
Jan  1 00:00:40 Vigor2130 daemon.info dnsmasq[1630]: using local addresses only for domain lan
Jan  1 00:00:40 Vigor2130 daemon.info dnsmasq[1630]: reading /tmp/dhcp.leases
Jan  1 00:00:40 Vigor2130 daemon.info dnsmasq[1630]: reading /tmp/resolv.conf.auto
Jan  1 00:00:40 Vigor2130 daemon.info dnsmasq[1630]: using nameserver 168.95.1.1#53
Jan  1 00:00:40 Vigor2130 daemon.info dnsmasq[1630]: using nameserver 4.2.2.1#53
Jan  1 00:00:40 Vigor2130 daemon.info dnsmasq[1630]: using local addresses only for domain lan
Jan  1 00:00:40 Vigor2130 daemon.info dnsmasq[1630]: read /etc/hosts - 2 addresses
Jan  1 00:00:40 Vigor2130 user.info : No IPSec configuration, exit
Jan  1 00:00:40 Vigor2130 user.info : cat: can't open '/etc/config/switch/stormconfig': No such file or directory
Jan  1 00:00:40 Vigor2130 user.info : sh: wps: unknown operand
Jan  1 00:00:41 Vigor2130 daemon.info pptpd[1659]: MGR: Manager process started
Jan  1 00:00:41 Vigor2130 daemon.info pptpd[1659]: MGR: Maximum of 51 connections available
Jan  1 00:00:42 Vigor2130 daemon.crit xl2tpd[1671]: setsockopt recvref: Protocol not available
Jan  1 00:00:42 Vigor2130 daemon.info xl2tpd[1671]: L2TP kernel support not detected.
Jan  1 00:00:42 Vigor2130 daemon.info xl2tpd[1679]: xl2tpd version xl2tpd-1.2.0 started on Vigor2130 PID:1679
Jan  1 00:00:42 Vigor2130 daemon.info xl2tpd[1679]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc.
Jan  1 00:00:42 Vigor2130 daemon.info xl2tpd[1679]: Forked by Scott Balmos and David Stipp, (C) 2001
Jan  1 00:00:42 Vigor2130 daemon.info xl2tpd[1679]: Inherited by Jeff McAdams, (C) 2002
Jan  1 00:00:42 Vigor2130 daemon.info xl2tpd[1679]: Forked again by Xelerance (www.xelerance.com) (C) 2006
Jan  1 00:00:42 Vigor2130 daemon.info xl2tpd[1679]: Listening on IP address 0.0.0.0, port 1701
Jan  1 00:00:43 Vigor2130 user.info : starting drayvoip........
Jan  1 00:00:43 Vigor2130 user.info : chmod: /dev/lp0: No such file or directory
Jan  1 00:00:44 Vigor2130 user.info : Warning -   changing ownership '//var/spool' to 65534/0
Jan  1 00:00:44 Vigor2130 user.info : Warning -   changing ownership '//var/spool' to 65534/0
Jan  1 00:00:44 Vigor2130 user.info : Warning -   changing ownership '//var/spool/lpd' to 65534/0
Jan  1 00:00:44 Vigor2130 user.info : Warning -   changing ownership '//var/spool/lpd' to 65534/0
Jan  1 00:00:44 Vigor2130 user.info : Warning -   changing ownership '//var/spool/lpd/p1' to 65534/0
Jan  1 00:00:44 Vigor2130 user.info : Warning -   changing ownership '//var/spool/lpd/p1' to 65534/0
Jan  1 00:00:44 Vigor2130 user.info : Warning - p1: cannot stat lp device '/dev/lp0' - No such file or directory
Jan  1 00:00:45 Vigor2130 user.info : 0000/0000/0
Jan  1 00:00:46 Vigor2130 user.info : 05e3/0608/0
Jan  1 00:00:47 Vigor2130 user.info syslog: command: write 1 6 0x0 0x10370180
Jan  1 00:00:53 Vigor2130 auth.info login[1876]: root login on 'pts/0'
Jan  1 00:01:18 Vigor2130 authpriv.info dropbear[2355]: Running in background

軟體

  1. vigor2130 (Google Code)