====== 硬體 ======
# cat /proc/cpuinfo
system type : Broadcom BCM4710 chip rev 0
processor : 0
cpu model : BCM4710 V0.0
BogoMIPS : 82.94
wait instruction : no
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : no
hardware watchpoint : no
VCED exceptions : not available
VCEI exceptions : not available
# cat /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 13316096 12574720 741376 0 1531904 3801088
Swap: 267362304 0 267362304
MemTotal: 13004 kB
MemFree: 724 kB
MemShared: 0 kB
Buffers: 1496 kB
Cached: 3712 kB
SwapCached: 0 kB
Active: 2964 kB
Inactive: 2268 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 13004 kB
LowFree: 724 kB
SwapTotal: 261096 kB
SwapFree: 261096 kB
# lspci
00:00.0 RAM memory: Broadcom Corporation Device 0803
00:01.0 Ethernet controller: Broadcom Corporation BCM47xx Sentry5 iLine32 HomePNA 2.0
00:02.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller
00:03.0 Modem: Broadcom Corporation BCM47xx V.92 56k modem
00:04.0 USB Controller: Broadcom Corporation Sentry5 USB Controller
00:05.0 PCI bridge: Broadcom Corporation Sentry5 PCI Bridge
00:06.0 MIPS: Broadcom Corporation Sentry5 MIPS32 CPU
00:07.0 FLASH memory: Broadcom Corporation Sentry5 External Interface Core
00:08.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller
01:00.0 Host bridge: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge (rev 01)
01:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
===== UART =====
- [[http://wl500g.info/showthread.php?t=587&page=1&pp=15|Make an expansion board with a serial port(s) for WL-500b/g]]
===== 第二組USB =====
- [[http://wl500g.info/showthread.php?s=65d1ded33283574e7d0c3d86a9ec31fe&t=3571|WL500g with 2 usb ports]]