1. 有怪獸!! ASUS RT-N16
2. 怪獸機 ASUS RT-N16 開箱報告
3. ASUS RT-N16台灣正式發售版
4. NEW ASUS RT-N16 ROUTER!
5. BCM4716
6. BCM4718

1. Samba 3.0.25b
2. vsFTPd 2.0.4
3. rTorrent 0.8.0
4. CTorrent 2.0.1.1

1. brcm47xx

# cat /proc/cpuinfo

system type             : Broadcom BCM4716 chip rev 1
processor               : 0
cpu model               : MIPS 74K V4.0
BogoMIPS                : 225.28
wait instruction        : no
microsecond timers      : yes
tlb_entries             : 64
extra interrupt vector  : no
hardware watchpoint     : yes
ASEs implemented        : mips16 dsp
VCED exceptions         : not available
VCEI exceptions         : not available

unaligned_instructions  : 7
dcache hits             : 2147483648
dcache misses           : 2798449757
icache hits             : 2147483648
icache misses           : 3206405631
instructions            : 2147483648

# cat /proc/meminfo

MemTotal:       126336 kB
MemFree:        100088 kB
Buffers:          1608 kB
Cached:           6728 kB
SwapCached:          0 kB
Active:           9472 kB
Inactive:         2256 kB
SwapTotal:       32760 kB
SwapFree:        32760 kB
Dirty:               0 kB
Writeback:           0 kB
AnonPages:        3400 kB
Mapped:           3820 kB
Slab:             9448 kB
SReclaimable:     4824 kB
SUnreclaim:       4624 kB
PageTables:        472 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:     95928 kB
Committed_AS:    12164 kB
VmallocTotal:   786388 kB
VmallocUsed:      3992 kB
VmallocChunk:   781400 kB

# cat /proc/version

Linux version 2.6.22 (root@localhost.localdomain) (gcc version 4.1.2) #153 Tue Jun 23 16:25:53 CST 2009

# uname -a

Linux (none) 2.6.22 #153 Tue Jun 23 16:25:53 CST 2009 mips unknown

# cat /tmp/syslog.log

Jan  1 00:00:08 (none) syslog.info syslogd started: BusyBox v1.7.2
Jan  1 00:00:08 (none) user.notice igmp[1818]: igmp started!
Jan  1 00:00:09 (none) user.emerg USB storage: "409/56/0" was plugged in.
Jan  1 00:00:13 (none) user.emerg dhcp client: deconfig: lease is lost
Jan  1 00:00:14 (none) user.notice igmp[1818]: setsockopt- MRT_ADD_VIF
Jan  1 00:00:14 (none) user.notice igmp[1818]:  interface 192.168.1.1, DOWNSTREAM ver=0x16 name=br0 index=7
Jan  1 00:00:14 (none) user.notice igmp[1818]:  interface 0.0.0.0, UPSTREAM ver=0x16 name=eth0 index=4
Jan  1 00:00:15 (none) user.emerg WAN Connection: The cable for Ethernet was not plugged in.
Jan  1 00:00:24 (none) user.emerg USB storage: ext2 fs mounted to /tmp/harddisk/part0
Jan  1 00:00:32 (none) user.notice igmp[1818]: igmp:IP_ADD_MEMBERSHIP Failed
Jan  1 00:00:47 (none) user.emerg USB storage: 32MB swap file is added
Jan  1 00:00:47 (none) user.emerg FTP Server: daemon is stoped
Jan  1 00:00:47 (none) user.emerg FTP Server: daemon is started
Jan  1 00:00:47 (none) user.emerg Samba Server: daemon is stoped
Jan  1 00:00:48 (none) user.emerg Samba Server: daemon is started
Jan  1 00:00:49 (none) user.emerg Media Server: daemon is started

# dmesg

Linux version 2.6.22 (root@localhost.localdomain) (gcc version 4.1.2) #153 Tue Jun 23 16:25:53 CST 2009
CPU revision is: 00019740
Determined physical RAM map:
 memory: 07fff000 @ 00000000 (usable)
On node 0 totalpages: 32767
  Normal zone: 255 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 32512 pages, LIFO batch:7
Built 1 zonelists.  Total pages: 32512
Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
CPU: BCM4716 rev 1 at 453 MHz
Using 226.500 MHz high precision timer.
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 126064k/131068k available (2771k kernel code, 4856k reserved, 564k data, 124k init, 0k highmem)
Calibrating delay loop... 225.28 BogoMIPS (lpj=112640)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Using membase 8000000
PCI: Initializing host
PCI: Reset RC
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Setting latency timer of device 0000:01:00.0 to 64
PCI: Fixing up bridge
PCI: Setting latency timer of device 0000:01:00.1 to 64
PCI: Enabling device 0000:01:00.1 (0004 -> 0006)
PCI: Fixing up bus 1
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.4 (2008/08/26) Phillip Lougher
NTFS driver 2.1.28 [Flags: R/O].
fuse init (API version 7.8)
io scheduler noop registered (default)
HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
loop: module loaded
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.17
PPTP driver version 0.8.2
Physically mapped flash: Found 1 x16 devices at 0x0 in 8-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
Physically mapped flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x2000000 at 0x1c000000
Physically mapped flash: squashfs filesystem found at block 1816
Creating 4 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "boot"
0x00040000-0x01fe0000 : "linux"
0x001c63f8-0x01fe0000 : "rootfs"
0x01fe0000-0x02000000 : "nvram"
Found a 0MB  serial flash
sflash: found no supported devices
GACT probability NOT on
Mirror/redirect action on
netem: version 1.2
u32 classifier
    Performance counters on
    input device check on
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1023 buckets, 8184 max)
ctnetlink v0.93: registering with nfnetlink.
ipt_time loading
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ipgre init: can't add protocol
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 124k freed
Warning: unable to open an initial console.
emf: module license 'unspecified' taints kernel.
PCI: Setting latency timer of device 0000:00:02.0 to 64
eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.27
PCI: Setting latency timer of device 0000:00:01.0 to 64
eth1: Broadcom BCM4329 802.11 Wireless Controller 5.10.56.27
Algorithmics/MIPS FPU Emulator v1.5
vlan1: add 33:33:00:00:00:01 mcast address to master interface
vlan1: add 01:00:5e:00:00:01 mcast address to master interface
vlan1: add 33:33:ff:76:f3:89 mcast address to master interface
vlan1: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan1 entered promiscuous mode
device eth1 entered promiscuous mode
br0: port 2(eth1) entering learning state
br0: port 1(vlan1) entering learning state
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
br0: topology change detected, propagating
br0: port 1(vlan1) entering forwarding state
dbg: usb init
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB20H mdio control register : 0x80000010
PCI: Setting latency timer of device 0000:00:04.1 to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:04.1: irq 5, io mem 0x18004000
ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB20H mdio control register : 0x80000010
PCI: Setting latency timer of device 0000:00:04.0 to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:04.0: irq 5, io mem 0x18009000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
ufsd: no version for "struct_module" found: kernel tainted.
ufsd: driver loaded at c024d000 built on Mar  5 2009 13:51:35
UFSD version 7.02 (Mar  5 2009, 13:50:00)
NTFS read/write support included
$Id: ufsdvfs.c,v 1.195 2009/02/02 15:38:06 shura Exp $
usb 1-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
vlan1: del 33:33:ff:76:f3:89 mcast address from vlan interface
vlan1: del 33:33:ff:76:f3:89 mcast address from master interface
vlan1: del 01:00:5e:00:00:01 mcast address from vlan interface
vlan1: del 01:00:5e:00:00:01 mcast address from master interface
vlan1: del 33:33:00:00:00:01 mcast address from vlan interface
vlan1: del 33:33:00:00:00:01 mcast address from master interface
br0: port 1(vlan1) entering disabled state
vlan1: dev_set_promiscuity(master, 1)
vlan1: add 01:00:5e:00:00:01 mcast address to master interface
vlan1: add 33:33:00:00:00:01 mcast address to master interface
vlan1: add 33:33:ff:76:f3:89 mcast address to master interface
br0: port 1(vlan1) entering learning state
br0: topology change detected, propagating
br0: port 1(vlan1) entering forwarding state
[k] track_flag=0, clean_flag=101, ipaddr=0
eth1: no IPv6 routers present
scsi 0:0:0:0: Direct-Access     FUJITSU  MHA2021AT        8210 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 4233600 512-byte hardware sectors (2168 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 73 00 00 08
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 4233600 512-byte hardware sectors (2168 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 73 00 00 08
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda:[k] track_flag=0, clean_flag=100, ipaddr=0
 sda1
sd 0:0:0:0: [sda] Attached SCSI disk
usb-storage: device scan complete
br0: no IPv6 routers present
vlan1: no IPv6 routers present
eth0: no IPv6 routers present
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Adding 32760k swap on /tmp/harddisk/part0/.swap.  Priority:-1 extents:9 across:32796k