Console

J5: (1)3.3V (2)Tx (3)Rx (4)GND

 +Ethernet eth0: MAC address 00:11:6b:xx:xx:xx
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1
Default server: 0.0.0.0, DNS server IP: 0.0.0.0

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Red Hat certified release, version 1.92 - built 15:16:07, Feb  3 2004

Platform: IXDP425 Development Platform (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x02000000, 0x000723a0-0x01ff3000 available
FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each.
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> boot;exec 0x01d00000
have eRcOmM
copy kernel code from flash to RAM
copy ramdisk file from flash to RAM
run kernel
Using base address 0x01d00000 and length 0x000f9088
Uncompressing Linux.................................................................... done, booting the kernel.
Linux version 2.4.22-xfs (root@localhost.localdomain) (gcc version 3.2.1) #617 Tue Jul 11 13:05:07 CST 2006
CPU: XScale-IXP425/IXC1100 revision 1
Machine: Intel IXDP425 Development Platform
Warning: bad configuration page, trying to continue
Security risk: creating user accessible mapping for 0x60000000 at 0xff00f000
Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000
Security risk: creating user accessible mapping for 0x54000000 at 0xf4000000
Security risk: creating user accessible mapping for 0x55000000 at 0xf5000000
Security risk: creating user accessible mapping for 0x56000000 at 0xf6000000
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,115200 root=/dev/ram0 initrd=0x01000000,14M mem=32M@0x00000000
Calibrating delay loop... 266.24 BogoMIPS
Memory: 32MB = 32MB total
Memory: 15828KB available (1701K code, 270K data, 244K init)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
We need delay 20 seconds to let BIG HDD ready smoothly.
PCI Autoconfig: Found Bus 0, Device 1, Function 0
PCI Autoconfig: BAR 0, I/O, size=0x20, address=0xffffffe0
PCI Autoconfig: Found Bus 0, Device 1, Function 1
PCI Autoconfig: BAR 0, I/O, size=0x20, address=0xffffffc0
PCI Autoconfig: Found Bus 0, Device 1, Function 2
PCI Autoconfig: BAR 0, Mem, size=0x100, address=0x4bffff00
PCI Autoconfig: Found Bus 0, Device 4, Function 0
PCI Autoconfig: BAR 0, I/O, size=0x8, address=0xffffffb8
PCI Autoconfig: BAR 1, I/O, size=0x4, address=0xffffffb4
PCI Autoconfig: BAR 2, I/O, size=0x8, address=0xffffffa8
PCI Autoconfig: BAR 3, I/O, size=0x4, address=0xffffffa4
PCI Autoconfig: BAR 4, I/O, size=0x80, address=0xffffff00
PCI Autoconfig: BAR 5, Mem, size=0x1000, address=0x4bffe000
PCI: bus0: Fast back to back transfers disabled
PCI: Via IRQ fixup for 00:01.0, from 28 to 12
PCI: Via IRQ fixup for 00:01.1, from 27 to 11
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
SGI XFS with no debug enabled
SGI XFS Quota Management subsystem
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module version 2.6.1 (20010830)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xff000003 (irq = 15) is a XScale UART
ttyS01 at 0xff001003 (irq = 13) is a XScale UART
RAMDISK driver initialized: 16 RAM disks of 14336K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AEC6280: IDE controller on PCI bus 00 dev 20
AEC6280: chipset revision 16
AEC6280: not 100% native mode: will probe irqs later
AEC6280: Make sure ROM is disabled
    ide0: BM-DMA at 0xffffff00-0xffffff07, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xffffff08-0xffffff0f, BIOS settings: hdc:pio, hdd:pio
hda: ST340014A, ATA DISK drive
ide0 at 0xffffffb8-0xffffffbf,0xffffffb6 on irq 25
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
blk: queue c022f514, no I/O memory limit
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(66)
Partition check:
 hda: hda1 hda2 hda3
SCSI subsystem driver Revision: 1.00
* host:<NULL>
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
Using static MTD partitions.
Creating 4 MTD partitions on "IXP425 Flash":
0x00000000-0x00040000 : "RedBoot "
0x00040000-0x00060000 : "System Configuration"
0x00060000-0x00160000 : "Kernel"
0x00160000-0x00800000 : "Ramdisk"
usb.c: registered new driver hub
pci probe begin
ehci_hcd 00:01.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:01.2: irq 26, pci mem 4bffff00
usb.c: new USB bus registered, assigned bus number 1
IXP425_GPIO_GPIT1R:35b000, IXP425_GPIO_GPIT2R:36c9
PCI: 00:01.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:01.2 PCI cache line size corrected to 32.
ehci_hcd 00:01.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 4 ports detected
pci probe ok
host/usb-uhci.c: $Revision: 1.4 $ time 13:05:27 Jul 11 2006
host/usb-uhci.c: High bandwidth mode enabled
host/usb-uhci.c: USB UHCI at I/O 0xffffffe0, IRQ 26
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-uhci.c: USB UHCI at I/O 0xffffffc0, IRQ 26
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
i2c-dev.o: Registered 'IXP425 I2C Adapter' as minor 0
i2c-core.o: adapter IXP425 I2C Adapter registered as adapter 0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 14336K
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 244K
init started:  BusyBox v0.60.4 (2006.07.05-08:18+0000) multi-call binary
-------------------------------Begin in rc------------------------------
Insmod ixp400
Using /lib/modules/2.4.22-xfs/ixp400.o
Warning: loading ixp400 will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module init.
Insmod ixp425
Using /lib/modules/2.4.22-xfs/ixp425_eth.o
ixp425_eth:
Initializing IXP425 NPE Ethernet driver software v. 1.1
ixp425_eth: CPU clock speed (approx) = 0 MHz
[error] ixEthMiiPhyScan : unexpected Mii PHY ID 00008201
ixp425_eth: ixp0 is using the PHY at address 1
ixp425_eth: ixp1 is using the PHY at address 0

Please press Enter to activate this console. Creating ramfs for /var/lock/samba:
Limit the space of log folder:
Starting Hostname :
                                                                OK
Starting Modules :
ixp425_eth: ixEthMiiLinkStatus failed on PHY0.
        Can't determine
the auto negotiated parameters. Using default values.
Using /lib/modules/pbuttons.o
Using /lib/modules/rbuttons.o
Using /lib/modules/x1226-rtc.o
S3530: I2C based RTC driver.
i2c-core.o: driver S3530 registered.
S3530: RTC is S-3530A
S3530: found s3550 on IXP425 I2C Adapter
i2c-core.o: client [S3530] registered to adapter [IXP425 I2C Adapter](pos. 0).
begin in bt_interrupt(). jiffies is <2990> r_ok_time is <2990>
end of bt_interrupt()
Using /lib/modules/usbbuttons.o
insmoding ufsd.o
Using /lib/modules/ufsd.o
Warning: loading ufsd will taint the kernel: non-GPL license - Commertial product
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/nls_cp932.o
Using /lib/modules/nls_cp936.o
Using /lib/modules/nls_cp950.o
ufsd: driver loaded
UFSD version 5.11 (Jul 25 2005, 15:26:54)
New NTFS read/write support included
Format NTFS included
Extend NTFS included

Using /lib/modules/nls_cp949.o
Starting Set CGI_ds.conf:
ip_addr<192.168.0.100>
udhcp client (v0.9.6) started
Sending discover...
Sending discover...
Sending discover...
Sending select for 192.168.20.127...
Lease of 192.168.20.127 obtained, lease time 86400
killall: udhcpd: no process killed
XFS mounting filesystem ide0(3,1)
XFS mounting filesystem ide0(3,2)
valid_num[0] is <1> nvalid_num[0] is <0>.
valid_num[FIRST_DSK] is <1>  valid_num[SECOND_DSK] is <0>.
Setting up swapspace version 0, size = 131600384 bytes
Adding Swap: 128516k swap-space (priority -1)
                                                                OK
Starting Set HDD parameters :
                                                                OK
Restore time and timezone:
Sat Jan  1 00:00:39 2000
                                                                OK
Restore usrgrpshares:
                                                                OK
Generating telnet password:
pwd is <pl5urRYLO3hoM>.
                                                                OK
Starting WEB Server:
                                                                OK
                                                                OK
Starting CUPS :
Starting download:
download uses obsolete (PF_INET,SOCK_PACKET)
Creating ramfs for /tmp:
Starting Crond :
Starting samba:
Starting Rest Task :
FNS-1000: boot complete!
                                                                OK
Starting QuickSet Daemon :
                                                                OK
                                                                OK
Checking disk status :
Remove modules :
                                                                OK

Optware

LevelOne FNS-1000